![]() ![]() camera, mic, etc.) is consistent with the sample rate of the Saffire. So, the long and the short of it is, ensure the sample rate for any device that's connected to your computer that has an audio component (eg. I've been able to load any app that uses the camera mic without an issue. However, after they were all on the same page, everything was rock solid. I had to go through the same song and dance with the Recording device sample rate of the mic. ![]() Once it was back in sync, I'd restart the Windows Audio service.Īfter going through that song and dance when setting the Playback and Recording device sample rate of the Saffire to 48kHz. I discovered that if I went into Services and stopped the Windows Audio service, the blinking lights would stop and the Saffire would re-sync. Every time I would set the sample rate for a device and hit "Apply", the Saffire would go out of sync. That said, I did have a bit of an issue trying to set matching sample rates for both devices originally, though. After doing that and re-enabling the mic in Windows, I had no issues with the Saffire while accessing the camera mic. So, I swapped the camera for one with 48kHz capability and set it to that rate in the Sound Control Panel. I had the playback and recording device sample rate of the Saffire set to 48kHz, while the camera mic was set to 32kHz, which was the highest rate the camera was capable of. However, after doing a bit more research, I decided to check the sample rate of the camera's mic to see if it was using a different sample rate than the Saffire. So, my Focusrite was back to functioning solidly. I did extensive testing, loading and using various apps and could not reproduce the syncing issues. To my surprise, that completely put an end to the random sync'ing issues. So, on a hunch, I completely disabled it altogether in Windows Privacy settings. I had a feeling the issue was related to Windows attempting to access my camera's mic, because it was the only other audio device connected to the PC. In the Sound Control Panel, I also noticed that the sample rate would change randomly and unpredictably. In my case, I had this ongoing, and rather vexing issue, whereby the Saffire would randomly go out of sync and the lock/FW lights would start blinking. Read further down to find out how I resolved it. Old post, but for anyone who might have this issue in the future, I had a similar problem recently with a Saffire PRO 14 after upgrading to Windows 10 Pro from Windows 7. I pretty much run everything at 96kHz/24bit on my Saffire Pro 26, so I set my Windows settings to that. If the above does not apply, then I would get to the Sound Device settings in Windows for the Saffire (I'm assuming you're trying to use it as your primary output device), and set the sample rate & bitrate to whatever you'd like to use for both regular Windows applications and also ASIO applications like Ableton. I found this out via a lot of testing, and it has saved my Saffire Pro 26 from the trash heap after I switched from a very old MacBook Pro to a new Windows laptop with Thunderbolt 3. ![]() If by chance you are using the Saffire via Thunderbolt 3, through the various Apple adapters, then I would recommend checking your computer's BIOS menu for an option like "Thunderbolt BIOS Assist Mode". Is this on a desktop, or a laptop? If it's a desktop, are you using a dedicated Firewire card? Does any one experience this or run a Saffire with the supported Windows 10 build without issues. I don't really dig reinstalling Windows 10 (and not able to get updates), but I guess it is my only option. My build is newer, I guess I should downgrade. Sometimes I need to restart.įocusrite support just make me download a Mix Control 3.8b1, but nothing changed.įocusrite support didnt bring this up, but I was already aware of this when I start investigating the issue. If all programs that causes this are closed and the device is restarted, sometimes it syncs again. So some software just randomly stop the device from funcioning. But if before I run some other audio like for example Spotify, then VLC has no problem. For example, if I turn on the PC and open a video on VLC, it happens. The problem is that certain software, or overlap of programs (for example, any screen recorder software with Ableton), causes the saffire to de-sync (FW and LKD leds blinking, Mix Control crashes), with some variations. When the device performs, it do as always. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |